LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1310 (Instrument Cluster (Service Information)) >> Diagnosis And Testing >> Tachometer Does Not Work

Tachometer Does Not Work

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

The engine tachometer does not work, or works erratically.

1 CHECK WITH DIAGNOSTIC TOOL Result OK Result Not OK Action
  Connect a diagnostic scan tool.
Verify the absence of anomalies on the Instrument Panel Cluster (IPC).
Continue to Step 2 Presence of errors Proceed as indicated by the diagnostic tool
2 CHECK WITH DIAGNOSTIC TOOL Result OK Result Not OK Action
  With the diagnostic scan tool still connected to the DLC, test the functionality of the pointer through active diagnosis Continue to Step 3 Tachometer doesn't work for stepper motor malfunction Replace the IPC
3 CHECK WITH DIAGNOSTIC TOOL Result OK Result Not OK Action
  With the diagnostic scan tool still connected to the DLC, verify the absence of anomalies on the Powertrain Control Module (PCM). Diagnostic complete Presence of errors Proceed as indicated by the diagnostic tool