Removal And Installation
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If this Electronic Control Unit (ECU) is being replaced with a new unit, a diagnostic scan tool MUST be used to determine if alignment of the PROXI configuration data into the new ECU is needed. If PROXI alignment is needed, follow the routine outlined in the diagnostic scan tool for PROXI Configuration Alignment under the Body Control Module (BCM) Miscellaneous Functions menu.
The Tire Pressure Monitor (TPM) module is integral to the Radio Frequency Hub Module (RFHM). For removal and installation procedures, refer to MODULE, RADIO FREQUENCY (RF HUB), REMOVAL AND INSTALLATION .