LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1307 (Steering System) >> Column >> Shroud, Steering Column >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0165750Courtesy of CHRYSLER GROUP, LLC
  1. Position the top steering column shroud (2a) by engaging the inside clips (2b).
  2. Install the small closeout flange (1a) by engaging the inside retainers (1b).
    GC0165657Courtesy of CHRYSLER GROUP, LLC
  3. Tighten the fasteners (1a) that secure the top shroud to the steering column (1b).
  4. Position the lower steering column shroud by engaging the inside clips.
    GC0165870Courtesy of CHRYSLER GROUP, LLC
  5. Tighten the fasteners (2a) that secure the lower shroud (2b) to the steering column.
  6. Install the instrument cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
scientia non olet · About LEMON Manuals