LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1305 (Starting System (Service Information)) >> Switch, Ignition >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the ignition switch with steering lock to the steering column.
  2. Install and tighten the NEW  shear bolts until the heads shear off.
  3. Install the steering column. Refer to COLUMN, INSTALLATION .
scientia non olet · About LEMON Manuals