LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1304 (Battery (Service Information)) >> Sensor, Intelligent Battery (IBS) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the ground lead to the battery negative terminal.
  2. Connect the battery negative terminal and tighten the nut.
  3. Connect the wiring harness connector to the IBS.
scientia non olet · About LEMON Manuals