LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (948TE Automatic Transmission (Service Information)) >> Tube, Oil >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the left front tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
    GC0160107Courtesy of CHRYSLER GROUP, LLC
  3. Remove the oil supply tube bolts (1 and 3).
  4. Remove the oil supply tube (2) from the transmission.
    GC0159302Courtesy of CHRYSLER GROUP, LLC
  5. Remove and DISCARD  the differential end O-Ring seal (1).
    GC0159545Courtesy of CHRYSLER GROUP, LLC
  6. Remove and DISCARD  the oil supply tube O-Ring seal (1).
scientia non olet · About LEMON Manuals