LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (948TE Automatic Transmission (Service Information)) >> Shaft, Reaction >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission from the vehicle. Refer to REMOVAL AND INSTALLATION .
  2. Remove the bellhousing from the transmission. Refer to BELLHOUSING, REMOVAL AND INSTALLATION .
    GC0160151Courtesy of CHRYSLER GROUP, LLC
  3. Remove the bolts (2) holding the reaction shaft (1) to the intermediate support plate (4).
    GC0159236Courtesy of CHRYSLER GROUP, LLC
  4. Separate the reaction shaft (2) from the intermediate support plate (3).
    GC0159745Courtesy of CHRYSLER GROUP, LLC
  5. Remove the seal rings (1) from the grooves in the inner reaction shaft hub (2).
    GC0159275Courtesy of CHRYSLER GROUP, LLC
  6. Remove the seal ring (1) from the groove in the outer reaction shaft hub (2).
scientia non olet · About LEMON Manuals