Removal And Installation: Removal
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
The input and output speed sensors are serviced as an assembly. The speed sensors can be replaced with the transmission in the vehicle.
- Remove the valve body. Refer to VALVE BODY, REMOVAL AND INSTALLATION .
- Remove the screw (1) holding the speed sensor assembly to the transmission housing.
- Separate the speed sensor assembly (1) from the transmission.
- Release the lock on the wire harness connector.
- Separate the wire harness connector from the speed sensor assembly.