LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (948TE Automatic Transmission (Service Information)) >> Bearings, Differential >> Removal And Installation >> Differential Bearing Race Removal

Differential Bearing Race Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Case side shown. Bellhousing side similar.

  1. Remove the transmission from the vehicle. Refer to REMOVAL AND INSTALLATION .
  2. Remove the bellhousing. Refer to BELLHOUSING, REMOVAL AND INSTALLATION .
    GC0159469Courtesy of CHRYSLER GROUP, LLC
  3. Remove the differential assembly (1) from the transmission.
    GC0159899Courtesy of CHRYSLER GROUP, LLC
  4. Using tool (special tool #9664, Remover, Bearing Cup) (2), (special tool #C-637, Slide Hammer, Universal) (1) and suitable vise-grip pliers (3) to hold the expansion screw in position, remove the bearing race (4) from the transmission housing.
scientia non olet · About LEMON Manuals