Diagnostic Test
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FOR AN ACTIVE DTC
- Turn the ignition on.
- With the scan tool, read DTCs and record on the repair order.
Is the DTC active or pending?
Yes
- Go To 2
No
- Perform the INTERMITTENT CONDITION diagnostic procedure. Refer to INTERMITTENT CONDITION .
- CHECK THE ANTI-LOCK BRAKE MODULE FOR WHEEL SPEED SENSOR FAULTS
- With the scan tool, read ABS Module DTCs.
Are any Wheel Speed Sensor DTCs set in the ABS Module?
Yes
- Perform the appropriate ABS Module diagnostic procedure(s). Refer to DIAGNOSTIC CODE INDEX .
No
- Replace the ABS Module in accordance with the Service Information. Refer to MODULE, ANTI-LOCK BRAKE SYSTEM (ABS), REMOVAL AND INSTALLATION .
- Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .
- With the scan tool, read ABS Module DTCs.