LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1290 (Body - Interior & Exterior) >> Diagnosis And Testing >> Road Testing >> Road Testing Wind-Windshield-Rear Window

Road Testing Wind-Windshield-Rear Window

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a soapy water solution to the perimeter of the glass.
  2. From inside the vehicle, blow with compressed air along the whole perimeter and visually check for air bubbles.
  3. If a leak is located on the vertical uprights, it is possible to repair by removing the pillar trim and injecting sealant from the inside.
  4. If a leak is located at the top, it is possible to repair by injecting sealant from the inside.
  5. If a leak is located at the bottom, it is possible to repair by removing the necessary trim panels and injecting sealant from the inside.
  6. If a leak is widespread around the perimeter, it is recommended to remove the glass and install with complete new sealant.
scientia non olet · About LEMON Manuals