Lock Cylinder Loose
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
| STEP | WHAT TO DO | OK (no problem found) | PROBLEM FOUND | CORRECTION |
|---|---|---|---|---|
| 1 | DOOR LOCK CYLINDER CHECK | Continue to Step 2 | Presence of signs of a break-in on the side of the door lock cylinder | Replace the door lock cylinder. Refer to CYLINDER, DOOR LOCK, REMOVAL AND INSTALLATION . |
| Check for the presence of signs of a break-in on the side of the door lock cylinder | ||||
| 2 | UNDER HEAD GASKET CONDITION CHECK | Continue to Step 3 | Under-head gasket missing | Install a new gasket, if missing |
| Check for the presence of the under-head gasket | ||||
| 3 | MOUNTING FORK CHECK | Proceed to Step 4 | Mounting fork missing | Install a new fork and remove the old fork from the bottom of the door |
| Check for the fixing fork | ||||
| 4 | MOUNTING FORK CHECK INSTALLATION CHECK | End of diagnosis | Fork not installed/secured correctly | Replace and install the fork |
| Check that the mounting fork is positioned correctly |