Gap And Flush: Specifications

BODY GAP AND FLUSH SPECIFICATIONS FOR THE ADJUSTMENT OF MOVING PARTS 

To facilitate and verify moving parts disassembly operations, the existing gaps are shown (in millimeters) to allow appropriate adjustment.

The adjustment procedure is explained in the information describing moving part removal and installation procedures.

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC