LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1288 (Heating & Air Conditioning (Service Information)) >> Controls >> Sensor, Temperature, Air Outlet >> Description And Operation

Description And Operation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0152817Courtesy of CHRYSLER GROUP, LLC

There are four temperature sensors on the Heating, Ventilation and Air Conditioning (HVAC) unit output. Two are on the lower part and the others are on the upper part.

These sensors are NTC type. This means that their resistance decreases when temperature increases.

The sensor resistance is about 10 kilohms at 25°C (77°F) and 32, 650 kilohms at 0°C (32°F).

The air duct temperature sensors are diagnosed using a scan tool. Refer to DIAGNOSTIC CODE INDEX .

The air duct temperature sensors cannot be adjusted or repaired and must be replaced if inoperative or damaged.