LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1287 (Frame And Bumpers) >> Under Body Protection >> Shield, Fuel Tank >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the fuel tank shields for damage.
  2. Using a suitable supporting device, position the fuel tank shields onto the vehicle.
  3. Install and tighten the fasteners to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
scientia non olet · About LEMON Manuals