Torque Specifications
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | N.m | Ft Lbs | In Lbs | COMMENT |
|---|---|---|---|---|
| Front air dam actuator nuts | 20 | 15 | - | |
| Front air dam front screws | 20 | 15 | - | |
| Front air dam nuts | 24 | 18 | - | |
| Front bumper reinforcement nuts | 40 | 30 | - | |
| Front lower load beam bolts | 40 | 30 | - | |
| Front lower load beam bracket bolts | 8 | - | 71 | |
| Front pedestrian impact crossmember bolts | 40 | 30 | - | |
| Front suspension crossmember to body - center | 60 + 135° | 44 + 135° | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Front suspension crossmember to body - front | 130 + 135° | 96 + 135° | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Front suspension crossmember to body - rear | 60 + 135° | 44 + 135° | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Headlamp mounting crossmember to front bumper reinforcement bracket bolts | 9 | - | 80 | |
| Rear crossmember bolts | 60 + 135° | 44 | - | Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Rear crossmember bracket bolts | 100 | 74 | - | |
| Rear energy absorber nuts | 20 | 15 | - | |
| Trailer hitch bolts | 165 | 122 | - | |
| Trailer hitch nuts | 20 | 15 | - | |
| Underbody tunnel crossmember bolts | 20 | 15 | - |