LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1286 (2.4L Engine (Service Information)) >> Lubrication >> Plug, Oil >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0084060Courtesy of CHRYSLER GROUP, LLC
CAUTION:

Excessive use of brake parts cleaner to clean threads in block could cause #5 main bearing failure.

NOTE:

Rear plug shown, other plugs are similar.

  1. Remove the plug (2) from the engine block.
  2. Use Mopar® Brake Parts Cleaner (or equivalent) sparingly to clean the block.
scientia non olet · About LEMON Manuals