LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1286 (2.4L Engine (Service Information)) >> Lubrication >> Jet, Piston Oil Cooler >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0103050Courtesy of CHRYSLER GROUP, LLC
NOTE:

The engine must be removed from the vehicle to service the piston oil cooler jets.

  1. Remove the engine, transmission, balance shaft/oil pump assembly and ladder frame. Refer to FRAME, LADDER, REMOVAL AND INSTALLATION .
  2. Remove bolt (1) and the piston oil cooler jet (2).
scientia non olet · About LEMON Manuals