LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1286 (2.4L Engine (Service Information)) >> Engine Block >> Seal, Crankshaft Oil, Front >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the vibration damper. Refer to DAMPER, VIBRATION, REMOVAL AND INSTALLATION  .
    GC0163570Courtesy of CHRYSLER GROUP, LLC
  2. Using a screwdriver, remove the front crankshaft oil seal (1).
scientia non olet · About LEMON Manuals