LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1286 (2.4L Engine (Service Information)) >> Engine Block >> Ring(S), Piston >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0144293Courtesy of CHRYSLER GROUP, LLC
CAUTION:

To avoid damage to the piston rings, they must be removed in the following order:

  • No. 1 (upper) piston ring (1)
  • No. 2 (intermediate) piston ring (2)
  • Oil ring upper side rail (3)
  • Oil ring lower side rail (4)
  • Oil ring expander (5)
GC0081636Courtesy of CHRYSLER GROUP, LLC
  1. Remove the No. 1 (upper) piston ring using a ring expander tool.
  2. Remove the No. 2 (intermediate) piston ring using a ring expander tool.
    GC0081637Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Do not use a piston ring expander to remove the oil ring side rails.

  3. Remove the oil ring upper side rail.
  4. Remove the oil ring lower side rail.
  5. Remove the oil ring expander (1).
scientia non olet · About LEMON Manuals