LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1286 (2.4L Engine (Service Information)) >> Engine Block >> Crankshaft >> Standard Procedure >> Crankshaft End Play

Crankshaft End Play

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0081626Courtesy of CHRYSLER GROUP, LLC
NOTE:

Typical engine block and crankshaft shown.

  1. Mount a dial indicator to a stationary point at the front of the engine. Locate the probe perpendicular against the nose of the crankshaft.
  2. Move the crankshaft all the way to the rear of its travel.
  3. Zero the dial indicator.
  4. Move the crankshaft forward to the limit of travel and read the dial indicator. Compare the measured end play to the specification. Refer to SPECIFICATIONS  .
NOTE:

Crankshaft thrust bearings are not selectable and are only available in a single thickness.

scientia non olet · About LEMON Manuals