LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1286 (2.4L Engine (Service Information)) >> Cylinder Head >> Rocker Arm, Valve >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the intake rocker arms are to be serviced, remove the Variable Valve Actuator Assembly (VVAA). Refer to ASSEMBLY, VARIABLE VALVE ACTUATION, REMOVAL AND INSTALLATION  .
  2. If the exhaust rocker arms are to be serviced, remove the camshaft. Refer to CAMSHAFT, ENGINE, REMOVAL AND INSTALLATION  .
    GC0170027Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    If the rocker arms are to be reused, identify their positions so that they can be reassembled into their original locations.

  3. Remove the rocker arms (1).
scientia non olet · About LEMON Manuals