Removal And Installation: Installation
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the rocker arms are being reused, reassemble them into their original locations.
- Lubricate the rocker arms (1) with clean engine oil before installation.
- Install the rocker arm(s).
- If the exhaust rocker arms were serviced, install the camshaft. Refer to CAMSHAFT, ENGINE, REMOVAL AND INSTALLATION .
- If the intake rocker arms were serviced, install the Variable Valve Actuator Assembly (VVAA). Refer to ASSEMBLY, VARIABLE VALVE ACTUATION, REMOVAL AND INSTALLATION .