LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1286 (2.4L Engine (Service Information)) >> Cylinder Head >> Lifter(S), Hydraulic >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the camshaft. Refer to CAMSHAFT, ENGINE, REMOVAL AND INSTALLATION  .
    GC0163524Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    If the rocker arms are to be reused, identify their positions so that they can be reassembled into their original locations.

  2. Remove the rocker arms (1).
    GC0169933Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    If the hydraulic lifters are to be reused, identify their positions so that they can be reassembled into their original locations.

  3. Remove the hydraulic lifters (1).