LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1286 (2.4L Engine (Service Information)) >> Cylinder Head >> Lifter(S), Hydraulic >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0169933Courtesy of CHRYSLER GROUP, LLC
NOTE:

If the hydraulic lifters are being reused, reassemble them into their original locations.

  1. Install the hydraulic lifters (1).
    NOTE:

    If the rocker arms are being reused, reassemble them into their original locations.

  2. Install the rocker arm(s).
  3. Install the camshaft. Refer to CAMSHAFT, ENGINE, REMOVAL AND INSTALLATION  .
scientia non olet · About LEMON Manuals