LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1285 (2.4L Fuel System) >> Fuel Injection >> Sensor, Crankshaft Position >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the crankshaft position sensor and tighten the screw to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Connect and lock the wire harness connector.
  3. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals