LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1285 (2.4L Fuel System) >> Fuel Injection >> Injector(S), Fuel >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fuel rail with injectors and securely tighten the retaining screws.
  2. Connect the fuel injector wire harness connectors.
  3. Install the fuel vapor solenoid.
  4. Connect the fuel vapor delivery pipe to the air box.
  5. Connect the electrical connection of the fuel vapor solenoid.
  6. Connect the quick coupling of the fuel delivery pipe.
  7. Install the sound absorber.
  8. Connect the fuel vapor quick coupling hose.
  9. Engage the fuel vapor tube in its retaining clip and connect the quick coupling.
  10. Put in place the tubing from the air filter to the throttle body, and securely tighten the throttle body side clamp.
  11. Connect the electrical connection of the air temperature sensor.
  12. Connect the air hose from the filter to the throttle body, and securely tighten the filter side clamp.
  13. Connect the engine oil vapor quick connect coupling.
  14. Securely tighten the air hose retaining screw.
  15. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals