LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1285 (2.4L Fuel System) >> Fuel Delivery >> Tube, Fuel Tank Filler >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the fuel filler tube and install the tube to body retaining nut.
  2. Connect the fuel vapor line quick connector.
  3. Connect the hose to fuel filler tube and securely tighten the clamp.
  4. Securely tighten the filler tube retaining screw.
  5. Install the fuel door, engaging the retaining clips.
  6. Position the door retention device and turn the screw 90°.
  7. Install the right rear splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, INSTALLATION .
  8. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals