LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1284 (1.3L Fuel System) >> Fuel Delivery >> Sending Unit And Sensor, Fuel Level >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fuel level sensor, complete with float, engage the clips of the submerged fuel pump drum.
  2. Connect the wire harness connector to the fuel level sending unit.
  3. Install the fuel pump module. Refer to MODULE, FUEL PUMP, INSTALLATION  .
scientia non olet · About LEMON Manuals