Resetting The Total Vehicle Mileage Indicator

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

Check that there is a letter H on the instrument panel display, which appears before reaching a mileage of 200 km (or the equivalent value in miles).
Connect the diagnosis equipment to the diagnostics socket on the vehicle, go to IPC control unit in the "Miscellaneous functions" menu and launch the "Reset milometer" procedure.
NOTE:
It is possible to launch the Total vehicle mileage indicator reset procedure once only.
At the end of the reset procedure, disconnect the diagnosis equipment and check that the letter H is no longer on the instrument panel display.