Activating Connected Services (For Versions/Markets Where Provided)
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
- Check that the vehicle is located in an area where GPS and the mobile network are available.
- Perform a Key-On and hold it for at least 10 minutes; in this case, the TBM will run some activities to connect to the server and the pop-up will be displayed simultaneously on the Radio screen.
- Perform a Key-Off /Key-On. The pop-up will appear again on the Radio screen.
- Wait for 2 minutes and perform a Key-Off/Key-On cycle. If a pop-up continues to appear on the Radio screen, the TBM is not yet ready for use; wait another 2 minutes and perform a Key-Off/Key-On cycle again. If the pop-up is no longer on the Radio screen, the TBM is ready for use and the procedure has been completed.
- After 3 attempts with 2-minute waits, perform a Key-Off/Key-On cycle again, and if the pop-up is still displayed on the Radio screen, open a ticket to the Help Desk (tk. EContact/Star).