LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.3L Engine (Service Information) >> Removal And Installation >> Engine (DDCT) On Maintenance Stand >> Installation

Engine (DDCT) On Maintenance Stand: Installation

  1. With the aid of a hydraulic lift, remove the engine from the maintenance stand.
  2. Place the engine on a suitable platform.
  3. Install the flywheel and clutch disc. Refer to the appropriate service information .
  4. Install the radiator coolant supply hose and tighten the band clamp.
  5. Install the coolant supply hose to the heater core and tighten the band clamp.
  6. Install the coolant return hose to the heater core and tighten the band clamp.
  7. Connect the quick coupling on the intake manifold side of the multi-way coolant pump inlet pipe.
  8. Install the multi-way radiator coolant inlet pipe and multi-way coolant pump inlet pipe and connect the quick couplings.
  9. Install the coolant pump inlet pipe and tighten the band clamp.
  10. Close the intermediate retaining clips.
scientia non olet · About LEMON Manuals