LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.3L Engine (Service Information) >> Lubrication >> Pick-Up, Oil Pump >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install a NEW  O-ring seal on the oil pump pick-up tube.
  2. Install the oil pump pick-up tube and tighten the screws to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  3. Install the oil pan. Refer to PAN, OIL, REMOVAL AND INSTALLATION  .
  4. If removed, install the oil filter and fill the engine crankcase with the proper oil to the correct level. Refer to CAPACITIES AND RECOMMENDED FLUIDS, SPECIFICATIONS .
scientia non olet · About LEMON Manuals