LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.3L Engine (Service Information) >> Engine Block >> Seal, Crankshaft Oil, Rear >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Remove the flexplate. Refer to FLEXPLATE, REMOVAL AND INSTALLATION  .
    G00594727Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    The rear crankshaft oil seal is destroyed when it is removed.

  2. Remove the rear crankshaft oil seal (1).
scientia non olet · About LEMON Manuals