LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.3L Engine (Service Information) >> Air Intake System >> Body, Air Cleaner >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the air cleaner body and securely tighten the bolts.
  2. Engage the coolant hose and O2 sensor wire harness retaining clip.
  3. Connect the clean air hose and tighten the band clamp with the (special tool #10288, Pliers, Hose Clamp).
  4. Connect the intake air tube and tighten the band clamp.
  5. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION  .
scientia non olet · About LEMON Manuals