LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior/Exterior >> Exterior >> Molding, Body Side >> Removal

Molding, Body Side: Removal

GC0146881Courtesy of CHRYSLER GROUP, LLC
  1. Apply a length of masking tape on the body, parallel to the top edge of the molding to use as a guide, if necessary.
  2. Warm the effected adhesive type molding and body metal to approximately 38°C (100°F) using a suitable heat lamp or heat gun.
  3. Pull stick-on molding from painted surface.
scientia non olet · About LEMON Manuals