Reservoir, Coolant: Installation

Courtesy of CHRYSLER GROUP, LLC

Install the coolant reservoir and tighten the nuts (1) to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
Install the wire harness retainer (2) onto the coolant reservoir.

Courtesy of CHRYSLER GROUP, LLC
Install the coolant hose retainer (3).
Install the outlet hose (2) onto the coolant reservoir and secure the clamp.
Install the inlet hose (1) onto the coolant reservoir and secure the clamp.
NOTE:
The low temperature cooling system must be vacuum filled.
Fill the cooling system. Refer to STANDARD PROCEDURE .