LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating & Air Conditioning (Service Information) >> Controls >> Sensor, Ambient Temperature >> Removal

Sensor, Ambient Temperature: Removal

GC0145911Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the grille. Refer to GRILLE, REMOVAL .
  3. Disconnect the wire harness connector (4) from the ambient air temperature sensor (2).
  4. Remove the push-pin fastener (1) that secures the ambient air temperature sensor to the condenser/radiator closeout (3) and remove the sensor.
scientia non olet · About LEMON Manuals