Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

CHECK FOR AN ACTIVE DTC

Ignition on, engine not running.
With the scan tool, erase DTCs in the PCM.
Attempt to start the engine and test drive the vehicle.
With the scan tool, select View DTCs.
Is the status Active for this DTC?

Yes
- Replace the Fuel Injector 5 in accordance with the service information. Refer to INJECTOR(S), FUEL, REMOVAL .
- Perform the PCM VERIFICATION TEST. Refer to PCM VERIFICATION TEST .
No
- Perform the INTERMITTENT CONDITION diagnostic procedure. Refer to INTERMITTENT DTC .