Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

CHECK FOR AN ACTIVE DIAGNOSTIC TROUBLE CODE (DTC)

NOTE:

For vehicle communication problems, use the scan tool to refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.

Turn the ignition on.
With the scan tool, read Transmission Control Module (TCM) DTCs and record on the repair order.
Is this DTC active?

Yes
- Perform the U0002-CAN C BUS OFF PERFORMANCE diagnostic procedure. Refer to U0002-00 .
No
- Perform the STORED LOST COMMUNICATION DTCS diagnostic procedure. Refer to STORED LOST COMMUNICATION DTCS .