LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 47 (8HP70 Automatic Transmission - DTCS P1D93-00 To U1479-00) >> DTC Troubleshooting >> P1DC6-00-TCM Not Programmed >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different variant/trim than selected.

The Transmission Control Module (TCM) is programmed during manufacturing with generic software to facilitate testing. This software does not have the proper calibrations to control a transmission in a vehicle. The check for generic software is made at power-up. If generic software is detected by the controller the Malfunction Indicator Lamp (MIL) will illuminate immediately and will stay illuminated until the proper software is installed.

This Diagnostic Trouble Code (DTC) will cause the Transmission to be placed into limp-in mode.

scientia non olet · About LEMON Manuals