Theory Of Operation
WARNING: This page is about a different variant/trim than selected.
The Transmission Control Module (TCM) performs several diagnostic checks to determine whether the temperature of a clutch is above a calibrated temperature value. These diagnostic checks use temperature models which are based upon the following:
- Input speed
- Output speed
- Current gear
- Target gear
- Calculated effective pressure on the engaging clutch
- Calculated effective pressure on the disengaging clutch
The Diagnostic Trouble Codes (DTCs) set by these diagnostics are used to protect the durability of the clutches by controlling the shift operation. No repair action is required. This fault is only used to initiate a calibration strategy and for diagnostic information when other faults are set.