LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (8HP70 Automatic Transmission - DTCS P0219-00 To P1D92-00) >> DTC Troubleshooting >> P1D20-00-Multi Module Handshake Failure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

CHECK FOR OTHER COMMUNICATION DIAGNOSTIC TROUBLE CODES (DTCS) 

NOTE:

For vehicle communication problems, use the scan tool to refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.

  1. Turn the ignition on.
  2. With the scan tool, read Transmission Control Module (TCM) DTCs and record on the repair order.

    Are any other Controller Area Network (CAN) Communication DTCs or Electronic Shifter Module (ESM) DTCs set?

    Yes 

    • Perform the appropriate diagnostic procedure.

    No