LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (5.7L Engine (Service Information)) >> Lubrication >> Sensor, Oil Pressure >> Removal

Sensor, Oil Pressure: Removal

WARNING: This page is about a different variant/trim than selected.
GC0175263Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Disconnect the oil pressure sensor wire harness connector (2).
  3. Remove the oil pressure sensor (1).
scientia non olet · About LEMON Manuals