LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (5.7L Engine (Service Information)) >> Lubrication >> Pump, Engine Oil >> Installation

Pump, Engine Oil: Installation

WARNING: This page is about a different variant/trim than selected.
GC0088115Courtesy of CHRYSLER GROUP, LLC
  1. Gently push the oil pump upwards and press firmly against the engine block. Finger tighten all of the oil pump retaining bolts to ensure the oil pump is fixed in it's position.
  2. Using the sequence shown in the illustration, tighten the oil pump bolts to 28 N.m (21 ft. lbs.).
  3. Install the timing cover. Refer to COVER(S), ENGINE TIMING, INSTALLATION .
  4. Install the oil pan. Refer to PAN, OIL, INSTALLATION .
scientia non olet · About LEMON Manuals