LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (5.7L Engine (Service Information)) >> Engine Block >> FLEXPLATE >> Removal

Engine Block: FLEXPLATE: Removal

WARNING: This page is about a different variant/trim than selected.
GC0088080Courtesy of CHRYSLER GROUP, LLC
  1. Remove the transmission. Refer to appropriate service information.
  2. Using the sequence shown in the illustration, remove the flexplate retaining bolts.
    CAUTION:

    Do not use an impact socket or a thick walled socket when removing or installing the flexplate retaining bolts, damage to the crankshaft, internal engine or the transmission may occur.

  3. Remove the flexplate.
scientia non olet · About LEMON Manuals