LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (5.7L Engine (Service Information)) >> Cylinder Head >> Valves, Intake And Exhaust >> Removal

Valves, Intake And Exhaust: Removal

WARNING: This page is about a different variant/trim than selected.
GC0088039Courtesy of CHRYSLER GROUP, LLC
  1. Remove the cylinder head. Refer to CYLINDER HEAD, REMOVAL .
    GC0080298Courtesy of CHRYSLER GROUP, LLC
  2. Compress the valve springs using the valve spring compressor (special tool #C-3422-D, Compressor, Valve Spring) and adapter (special tool #8464, Adapter, Valve Spring).
  3. Remove the valve retaining locks (1), valve spring retainers (2), valve stem seals (3) and valve springs (6).
  4. Before removing the valves (4, 5), remove any burrs from the valve stem lock grooves to prevent damage to the valve guides. Identify the valves to ensure installation in original location.
scientia non olet · About LEMON Manuals