LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (5.7L Engine (Service Information)) >> Air Intake System >> Body, Air Cleaner >> Installation >> Air Cleaner Housing

Air Cleaner Housing

WARNING: This page is about a different variant/trim than selected.
GC0146181Courtesy of CHRYSLER GROUP, LLC
  1. Position the air cleaner housing and secure the air cleaner housing rubber grommets (1) to the ball studs.
  2. Install the air cleaner housing duct push pin retainer (2).
    GC0146180Courtesy of CHRYSLER GROUP, LLC
  3. Install the air filter element into the housing assembly.
  4. Install the air cleaner cover onto the housing assembly locating tabs.
  5. Latch the 2 spring clips (3) and lock the air cleaner cover to the housing assembly.
  6. Connect the make up air hose (2) to the air cleaner cover.
  7. Connect the clean air hose to the air cleaner cover and tighten clamp (1) to 5 N.m (44 in. lbs.).
scientia non olet · About LEMON Manuals