Operating Ranges
WARNING: This page is about a different variant/trim than selected.
Transfer case operating ranges are:
- Operating positions: 4WD Auto - N - 4WD Low.
- 4WD Auto = Electronically controlled wet clutch for torque biasing.
- N = Transfer case neutral for 4-wheel flat recreational towing.
- 4WD Low = Low range (2.72:1) part time mode.
The 4WD Low range is for off road use only. It is not for use on hard surface roads unless the road surface is wet, slippery, or covered by ice and snow.
The low range reduction gear system is operative in 4WD Low range only. This range is for extra pulling power in off road situations. Low range reduction ratio is 2.72:1.