LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (8HP75 Automatic Transmission (Service Information)) >> Clutch, B >> Disassembly >> Clutch B Disassembly

Clutch B Disassembly

WARNING: This page is about a different variant/trim than selected.
GC0154668Courtesy of CHRYSLER GROUP, LLC
1. Wave plate
2. Steel plate
3. Backing plate
4. Friction plate
GC0152139Courtesy of CHRYSLER GROUP, LLC
  1. Position the input/output shaft and the P4 annulus drum assembly (1) on Assembly, Press Fixture 8925-3

    (special tool #8925-3, Assembly, Press Fixture)

    GC0142981Courtesy of CHRYSLER GROUP, LLC

    and Splitter, Bearing/Gear 1130

    (special tool #1130, Splitter, Bearing/Gear)

    GC0141532Courtesy of CHRYSLER GROUP, LLC

    .

    GC0154636Courtesy of CHRYSLER GROUP, LLC
  2. Remove the selectable shim (1).
    GC0154345Courtesy of CHRYSLER GROUP, LLC
  3. Remove the P1 (1) annulus from the assembly.
    GC0154594Courtesy of CHRYSLER GROUP, LLC
  4. Remove the B-clutch wave plate (1).
    GC0154430Courtesy of CHRYSLER GROUP, LLC
  5. Remove the friction and steel plates (2).
    GC0154377Courtesy of CHRYSLER GROUP, LLC
  6. Remove the backing plate (1) from the assembly (2).
scientia non olet · About LEMON Manuals